;; ┌────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▄░█▀█░█▀▄░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▄░█▀█░█▀▄░▀▀█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀░░▀░▀░▀░▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────┘

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[bar]
fill = 
empty = 
indicator = 

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/volume]
type = internal/alsa

; Soundcard to be used
; Usually in the format hw:# where # is the card number
; You can find the different card numbers in `/proc/asound/cards`
master-soundcard = default
speaker-soundcard = default
headphone-soundcard = default

; Name of the master, speaker and headphone mixers
; Use the following command to list available mixer controls:
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
; If master, speaker or headphone-soundcard isn't the default, 
; use `amixer -c # scontrols` instead where # is the number 
; of the master, speaker or headphone soundcard respectively
;
; Default: Master
master-mixer = Master

; Optionally define speaker and headphone mixers
; Default: none
;;speaker-mixer = Speaker
; Default: none
;;headphone-mixer = Headphone

; NOTE: This is required if headphone_mixer is defined
; Use the following command to list available device controls
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
; You may also need to use `amixer -c # controls` as above for the mixer names
; Default: none
;;headphone-id = 9

; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
; Default: false
;;mapped = true

; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5

; Available tags:
;   <label-volume> (default)
;   <ramp-volume>
;   <bar-volume>
format-volume = <ramp-volume> <bar-volume>
format-volume-background = ${color.shade6}
format-volume-padding = 2

; Available tags:
;   <label-muted> (default)
;   <ramp-volume>
;   <bar-volume>
format-muted = <label-muted>
format-muted-prefix = 
format-muted-background = ${color.shade6}
format-muted-padding = 2

; Available tokens:
;   %percentage% (default)
label-volume = %percentage%%

; Available tokens:
;   %percentage% (default
label-muted = " Muted"
label-muted-foreground = ${color.foreground}

; Only applies if <ramp-volume> is used
ramp-volume-0 = 
ramp-volume-1 = 
ramp-volume-2 = 
ramp-volume-3 = 
ramp-volume-4 = 

; Only applies if <bar-volume> is used
bar-volume-width = 10
bar-volume-gradient = false

bar-volume-indicator = ${bar.indicator}
bar-volume-indicator-foreground = ${color.foreground}

bar-volume-fill = ${bar.fill}
bar-volume-foreground-0 = ${color.foreground}
bar-volume-foreground-1 = ${color.foreground}
bar-volume-foreground-2 = ${color.foreground}

bar-volume-empty = ${bar.empty}
bar-volume-empty-foreground = #101010

; If defined, it will replace <ramp-volume> when
; headphones are plugged in to `headphone_control_numid`
; If undefined, <ramp-volume> will be used for both
; Only applies if <ramp-volume> is used
ramp-headphones-0 = 

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/brightness]
;type = internal/xbacklight
type = internal/backlight

; Use the following command to list available cards:
; $ ls -1 /sys/class/backlight/
;card = intel_backlight
card = amdgpu_bl0

; Available tags:
;   <label> (default)
;   <ramp>
;   <bar>
format = <ramp> <bar>
format-background = ${color.shade7}
format-padding = 2

; Available tokens:
;   %percentage% (default)
label = %percentage%%

; Only applies if <ramp> is used
ramp-0 = 
ramp-1 = 
ramp-2 = 
ramp-3 = 
ramp-4 = 

; Only applies if <bar> is used
bar-width = 10
bar-gradient = false

bar-indicator = ${bar.indicator}
bar-indicator-foreground = ${color.foreground}

bar-fill = ${bar.fill}
bar-foreground-0 = ${color.foreground}
bar-foreground-1 = ${color.foreground}
bar-foreground-2 = ${color.foreground}

bar-empty = ${bar.empty}
bar-empty-foreground = #101010

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/battery_bar]
type = internal/battery

; This is useful in case the battery never reports 100% charge
full-at = 99

; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
battery = BAT1
adapter = ACAD

; If an inotify event haven't been reported in this many
; seconds, manually poll for new values.
;
; Needed as a fallback for systems that don't report events
; on sysfs/procfs.
;
; Disable polling by setting the interval to 0.
;
; Default: 5
poll-interval = 2

; see "man date" for details on how to format the time string
; NOTE: if you want to use syntax tags here you need to use %%{...}
; Default: %H:%M:%S
time-format = %H:%M

; Available tags:
;   <label-charging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-charging>
format-charging = <bar-capacity>
format-charging-prefix = " "
format-charging-background = ${color.shade1}
format-charging-padding = 2

; Available tags:
;   <label-discharging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-discharging>
format-discharging = <bar-capacity>
format-discharging-prefix = " " 
format-discharging-background = ${color.shade1}
format-discharging-padding = 2

; Available tags:
;   <label-full> (default)
;   <bar-capacity>
;   <ramp-capacity>
format-full = <label-full>
format-full-prefix = 
format-full-background = ${color.shade1}
format-full-padding = 2

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current charge rate in watts)

label-charging = %percentage%%

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%

; Available tokens:
;   %percentage% (default)
label-full = " Full"

; Only applies if <bar-capacity> is used
bar-capacity-width = 10
bar-capacity-gradient = false

bar-capacity-indicator = ${bar.indicator}
bar-capacity-indicator-foreground = ${color.foreground}

bar-capacity-fill = ${bar.fill}
bar-capacity-foreground-0 = ${color.foreground}
bar-capacity-foreground-1 = ${color.foreground}
bar-capacity-foreground-2 = ${color.foreground}

bar-capacity-empty = ${bar.empty}
bar-capacity-empty-foreground = #101010

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/cpu_bar]
type = internal/cpu

; Seconds to sleep between updates
; Default: 1
interval = 0.5

; Available tags:
;   <label> (default)
;   <bar-load>
;   <ramp-load>
;   <ramp-coreload>
;;format = <label> <ramp-coreload>
format = <bar-load> <label>
format-prefix = " "
format-background = ${color.shade2}
format-padding = 2

; Available tokens:
;   %percentage% (default) - total cpu load averaged over all cores
;   %percentage-sum% - Cumulative load on all cores
;   %percentage-cores% - load percentage for each core
;   %percentage-core[1-9]% - load percentage for specific core
label = "%percentage%%"

; Only applies if <bar-load> is used
bar-load-width = 10
bar-load-gradient = false

bar-load-indicator = ${bar.indicator}
bar-load-indicator-foreground = ${color.foreground}

bar-load-fill = ${bar.fill}
bar-load-foreground-0 = ${color.foreground}
bar-load-foreground-1 = ${color.foreground}
bar-load-foreground-2 = ${color.foreground}

bar-load-empty = ${bar.empty}
bar-load-empty-foreground = #101010

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/filesystem_bar]
type = internal/fs

; Mountpoints to display
mount-0 = /
;;mount-1 = /home
;;mount-2 = /var

; Seconds to sleep between updates
; Default: 30
interval = 30

; Display fixed precision values
; Default: false
fixed-values = false

; Spacing between entries
; Default: 2
;;spacing = 4

; Available tags:
;   <label-mounted> (default)
;   <bar-free>
;   <bar-used>
;   <ramp-capacity>
format-mounted = <bar-used> <label-mounted>
format-mounted-prefix = " "
format-mounted-background = ${color.shade4}
format-mounted-padding = 2

; Available tags:
;   <label-unmounted> (default)
format-unmounted = <label-unmounted>
format-unmounted-prefix = " "
format-unmounted-background = ${color.shade4}
format-unmounted-padding = 2

; Available tokens:
;   %mountpoint%
;   %type%
;   %fsname%
;   %percentage_free%
;   %percentage_used%
;   %total%
;   %free%
;   %used%
; Default: %mountpoint% %percentage_free%%
label-mounted = %used%/%total%

; Available tokens:
;   %mountpoint%
; Default: %mountpoint% is not mounted
label-unmounted = "%mountpoint%: not mounted"

; Only applies if <bar-used> is used
bar-used-width = 10
bar-used-gradient = false

bar-used-indicator = ${bar.indicator}
bar-used-indicator-foreground = ${color.foreground}

bar-used-fill = ${bar.fill}
bar-used-foreground-0 = ${color.foreground}
bar-used-foreground-1 = ${color.foreground}
bar-used-foreground-2 = ${color.foreground}

bar-used-empty = ${bar.empty}
bar-used-empty-foreground = #101010

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/memory_bar]
type = internal/memory

; Seconds to sleep between updates
; Default: 1
interval = 2

; Available tags:
;   <label> (default)
;   <bar-used>
;   <bar-free>
;   <ramp-used>
;   <ramp-free>
;   <bar-swap-used>
;   <bar-swap-free>
;   <ramp-swap-used>
;   <ramp-swap-free>
format = <bar-used> <label>
format-prefix = " "
format-background = ${color.shade3}
format-padding = 2

; Available tokens:
;   %percentage_used% (default)
;   %percentage_free%
;   %gb_used%
;   %gb_free%
;   %gb_total%
;   %mb_used%
;   %mb_free%
;   %mb_total%
;   %percentage_swap_used%
;   %percentage_swap_free%
;   %mb_swap_total%
;   %mb_swap_free%
;   %mb_swap_used%
;   %gb_swap_total%
;   %gb_swap_free%
;   %gb_swap_used%

label = "%mb_used%"

; Only applies if <bar-used> is used
bar-used-width = 10
bar-used-gradient = false

bar-used-indicator = ${bar.indicator}
bar-used-indicator-foreground = ${color.foreground}

bar-used-fill = ${bar.fill}
bar-used-foreground-0 = ${color.foreground}
bar-used-foreground-1 = ${color.foreground}
bar-used-foreground-2 = ${color.foreground}

bar-used-empty = ${bar.empty}
bar-used-empty-foreground = #101010

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/mpd_bar]
type = internal/mpd

; Host where mpd is running (either ip or domain name)
; Can also be the full path to a unix socket where mpd is running.
;;host = 127.0.0.1
;;port = 6600
;;password = mysecretpassword

; Seconds to sleep between progressbar/song timer sync
; Default: 1
interval = 1

; Available tags:
;   <label-song> (default)
;   <label-time>
;   <bar-progress>
;   <toggle> - gets replaced with <icon-(pause|play)>
;   <toggle-stop> - gets replaced with <icon-(stop|play)>
;   <icon-random>
;   <icon-repeat>
;   <icon-repeatone> (deprecated)
;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
;   <icon-consume>
;   <icon-prev>
;   <icon-stop>
;   <icon-play>
;   <icon-pause>
;   <icon-next>
;   <icon-seekb>
;   <icon-seekf>
format-online = <label-song> <bar-progress> <label-time>
format-online-prefix = 
format-online-background = ${color.shade5}
format-online-padding = 2

;format-playing = ${self.format-online}
;format-paused = ${self.format-online}
;format-stopped = ${self.format-online}

; Available tags:
;   <label-offline>
format-offline = <label-offline>
format-offline-prefix = 
format-offline-background = ${color.shade5}
format-offline-padding = 2

; Available tokens:
;   %artist%
;   %album-artist%
;   %album%
;   %date%
;   %title%
; Default: %artist% - %title%
label-song =  " %artist% - %title%"
label-song-maxlen = 25
label-song-ellipsis = true

; Available tokens:
;   %elapsed%
;   %total%
; Default: %elapsed% / %total%
label-time = %elapsed% / %total%

; Available tokens:
;   None
label-offline = " Offline"

; Only applies if <icon-X> is used
icon-play = 
icon-pause = 
icon-stop = 
icon-next = 
icon-prev = 
icon-seekf = 
icon-seekb = 
icon-random = 
icon-repeat = 
icon-repeatone = 
icon-single = 
icon-consume =

; Used to display the state of random/repeat/repeatone/single
; Only applies if <icon-[random|repeat|repeatone|single]> is used
toggle-on-foreground = ${color.foreground}
toggle-off-foreground = ${color.background}

; Only applies if <bar-progress> is used
bar-progress-width = 10
bar-progress-gradient = false

bar-progress-indicator = ${bar.indicator}
bar-progress-indicator-foreground = ${color.foreground}

bar-progress-fill = ${bar.fill}
bar-progress-foreground-0 = ${color.foreground}
bar-progress-foreground-1 = ${color.foreground}
bar-progress-foreground-2 = ${color.foreground}

bar-progress-empty = ${bar.empty}
bar-progress-empty-foreground = #101010

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
