Z3 update push

config/boards/arm/adv360/adv360_left_defconfig

@@ -6,9 +6,10 @@
 CONFIG_SOC_SERIES_NRF52X=y
 CONFIG_SOC_NRF52840_QIAA=y
 CONFIG_BOARD_ADV360_LEFT=y
+CONFIG_ZMK_BLE=y
+
 CONFIG_ZMK_SPLIT=y
-CONFIG_ZMK_SPLIT_BLE=y
-CONFIG_ZMK_SPLIT_BLE_ROLE_CENTRAL=y
+CONFIG_ZMK_SPLIT_ROLE_CENTRAL=y
 
 # Enable MPU
 CONFIG_ARM_MPU=y
@@ -33,7 +34,7 @@ CONFIG_FLASH_MAP=y
 
 # Enable 32kHz crystal
 CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y
-CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM=y
+CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM=y
 
 CONFIG_ZMK_RGB_UNDERGLOW=y
 CONFIG_ZMK_RGB_UNDERGLOW_EXT_POWER=y
@@ -45,7 +46,7 @@ CONFIG_ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE=y
 CONFIG_WS2812_STRIP=y
 CONFIG_BT_CTLR_TX_PWR_PLUS_8=y
 CONFIG_PWM=y
-CONFIG_ZMK_LED_PWM=y
+CONFIG_LED_PWM=y
 CONFIG_ZMK_BACKLIGHT=y
 CONFIG_ZMK_BACKLIGHT_BRT_START=20
 CONFIG_ZMK_BACKLIGHT_AUTO_OFF_IDLE=y
@@ -57,28 +58,7 @@ CONFIG_ZMK_HID_CONSUMER_REPORT_USAGES_BASIC=y
 # Turn on logging, and set ZMK logging to debug output
 CONFIG_LOG=y
 CONFIG_ZMK_USB_LOGGING=y
-CONFIG_ZMK_LOG_LEVEL_DBG=y
-CONFIG_LOG_BUFFER_SIZE=65536
-CONFIG_LOG_STRDUP_BUF_COUNT=160
-#CONFIG_I2C_LOG_LEVEL_DBG=y
-#CONFIG_SPI_LOG_LEVEL_DBG=y
 
 
-# Turn on USB CDC ACM device
-CONFIG_USB=y
-CONFIG_USB_DEVICE_STACK=y
-CONFIG_USB_CDC_ACM=y
-CONFIG_USB_CDC_ACM_RINGBUF_SIZE=1024
-CONFIG_USB_CDC_ACM_DEVICE_NAME="CDC_ACM"
-CONFIG_USB_CDC_ACM_DEVICE_COUNT=1
 
-# Enable serial console
-CONFIG_SERIAL=y
-CONFIG_CONSOLE=y
-CONFIG_UART_INTERRUPT_DRIVEN=y
-CONFIG_UART_LINE_CTRL=y
-
-# Enable USB UART, and set the console device
-CONFIG_UART_CONSOLE=y
-CONFIG_USB_UART_CONSOLE=y
-CONFIG_UART_CONSOLE_ON_DEV_NAME="CDC_ACM_0"
+CONFIG_BUILD_OUTPUT_UF2=y